Wholesale Interpart Axle

Correctly install, use and maintain the correct installation, rational use and recurrent maintenance of the cross axle universal coupling, which is important to ensure the performance and its extended service life.Avoiding the long-term overloading and illegal operation of the universal coupling, otherwise it will reduce the service life. The coupling has the advantages of high load capacity, long service life, smooth operation, noise, and large axial compensation.After the installed universal coupling belt load is loaded after a class (8h), check whether the flange bolt is loose, and tightened again according to the preservation torque, so repeating several classes until the bolts are no longer loose. The grease is 2 industrial lithium-lithium-boe (a small amount of MOS2 can be added to the spline). If there is the above phenomenon, it is repaired or replaced.All of the above phenomena should be hungry, analyze the reasons, and maintenance.Wanxiang coupling for normal operation during maintenance period, the maintenance Wholesale CV Joint part manufacturers period is generally in half a year to one year, and the items should be checked when repairing: Cross-axis joual, bearing outer ring and short cylindrical rollerThe situation is measured, and its radial gap is measured, and the contact surface has indentation, pitting, peeling, crack, etc. (1) Is there an abnormal sound; (2) whether the cross bag has axial swift; (3) whether the radial beating is normal; (4) whether the coupling bolt is loose.25 mm, the SWP type and SWC type radial gap are highly allowed in Table 1. (2) Before the fastening bolts, threads must be cleaned or cleaned, and they are tightened, and fastened by interleaving mode (not allowed with a bottom hardness gasket). ,Wholesale CV Joint part manufacturers ...ادامه مطلب